Nzqf nq ref 1337 Version




Yüklə 59.52 Kb.
tarix16.04.2016
ölçüsü59.52 Kb.

powerpluswatermarkobject966761270NZQF NQ Ref

1337

Version

2

Page of




National Certificate in Drilling - Hydrocarbon (Driller) (Level 4) with strands in Off Shore Drilling, and On Shore Drilling

Level

4

Credits

119-123

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018.



Transition Arrangements

This qualification, the National Certificate in Drilling - Non-hydrocarbon (Senior Driller) (Level 4) with an optional strand in Water Well [Ref: 1333], the National Diploma in Drilling – Non-hydrocarbon (Driller Supervisor) (Level 5) [Ref: 1334], and the National Diploma in Drilling – Hydrocarbon (Rig Manager, Tool Pusher) (Level 5) with strands in Off Shore Drilling, and On Shore Drilling [Ref: 1338] have been reviewed and replaced by the New Zealand Certificate in Drilling (Level 5) [Ref: 2623].


The last date for entry into training programmes or courses leading to this qualification is 31 December 2015. The last date of assessment for the replaced qualification is 31 December 2018.
People working towards the replaced qualification must complete its requirements or transfer to a programme of study or training leading to its replacement by 31 December 2018.
It is anticipated that no existing candidates will be disadvantaged by these transition arrangements. However, anyone who feels that they have been disadvantaged may appeal to MITO at the address below. Appeals will be considered on a case by case basis.
For detailed information see Review Summaries on the NZQA website.

NZQF National Qualification Registration Information




Process

Version

Date

Last Date for Assessment


Registration

1

October 2007

December 2018

Review

2

March 2015

December 2018



Standard Setting Body

NZ Motor Industry Training Organisation (Incorporated) (MITO)

PO Box 10803

Wellington 6143


Telephone 0800 88 2121

Fax 04 494 0006

Email info@mito.org.nz

Website www.mito.org.nz


National Certificate in Drilling - Hydrocarbon (Driller) (Level 4) with strands in Off Shore Drilling, and On Shore Drilling




Level


4

Credits


119-123



Purpose

The National Certificate in Drilling - Hydrocarbon (Driller) (Level 4) with strands in Off Shore Drilling, and On Shore Drilling, recognises the skills of an experienced senior driller at an oil or gas drilling operation. The holder of the qualification is able to perform tasks involving a broad range of varied activities most of which are complex and non-routine. They are responsible for the quantity and quality of the output of others and contribute to the development of technical solutions to non-routine problems.


This qualification has a core component of essential skills required to work at a hydrocarbon drilling operation related to maintaining standard procedures and safe working practices; rigging up; conducting drilling operations; performing drilling calculations and reporting; carrying out well control and blowout prevention; participating in nippling-up and pressure tests; maintaining drilling rig communications systems; managing equipment maintenance; maintaining personnel management systems; participating in, leading and facilitating work teams in a hydrocarbon drilling environment; and managing non-routine, complex technical situations in a non-hydrocarbon drilling environment. A small core elective that recognises a variety of skill sets is required due to the diversity of drilling environments.
The strands in Off Shore Drilling, and On Shore Drilling, provide opportunities for specialisation. The Off Shore Drilling strand recognises skills in conducting pre-spud operations in a hydrocarbon drilling environment. The On Shore Drilling strand recognises skills in shutting down rigs and coordinating air drilling operations in a hydrocarbon drilling environment. There is an optional standard in this qualification, however, it is not required to achieve the qualification but may be required in some employment contexts.
This qualification includes Australian competency standards that are part of the DRT03 Drilling Training Package – Certificate 1V in Drilling. The New Zealand Extractive Industries Training Organisation has endorsed these standards.
This qualification is part of a pathway, which begins with the National Certificate in Drilling - Hydrocarbon (Floorman) (Level 2) with strands in Off Shore Drilling, and On Shore Drilling [Ref: 1335], and continues with the National Certificate in Drilling - Hydrocarbon (Derrickman) (Level 3) with strands in Off Shore Drilling, and On Shore Drilling [Ref: 1336], culminating in the National Diploma in Drilling - Hydrocarbon (Rig Manager, Tool Pusher) (Level 5) with strands in Off Shore Drilling, and On Shore Drilling [Ref: 1338].

Special Notes

Prerequisite: National Certificate in Drilling - Hydrocarbon (Floorman) (Level 3) with a strand in Off Shore Drilling, or On Shore Drilling [Ref: 1335], or demonstrate equivalent skills and knowledge.



Credit Range




Core Compulsory


Core Elective

Level 3 credits

7

0-5

Level 4 credits

101

0-5

Minimum totals

108

5



Off Shore Drilling Strand

On Shore Drilling Strand


Level 3 credits

6



Level 4 credits



10

Minimum totals

6

10

Minimum total with strand

119

123


Summary of Requirements


  • Core Compulsory standards

  • Core Elective – A minimum of 5 credits as specified

One of the following strands is required



  • On Shore Drilling Strand


Award of NQF Qualifications
Credit gained for a standard may be used only once to meet the requirements of this qualification.
Unit standards and achievement standards that are equivalent in outcome are mutually exclusive for the purpose of award. The table of mutually exclusive standards is provided in section 7 of the New Zealand Qualifications Authority (NZQA) Rules and Procedures publications available at http://www.nzqa.govt.nz/ncea/acrp/index.html.
Reviewed standards that continue to recognise the same overall outcome are registered as new versions and retain their identification number (ID). Any version of a standard with the same Id may be used to meet qualification requirements that list the ID and/or that specify the past or current classification of the standard.
Detailed Requirements
Core Compulsory

The following standards are required


Engineering and Technology > Drilling Industry > Drilling - Hydrocarbon

ID

Title

Level

Credit

23187

Maintain standard procedures and safe working practices in a hydrocarbon drilling environment

4

3

23188

Rig up in a hydrocarbon drilling environment

3

7

23190

Conduct drilling operations in a hydrocarbon drilling environment

4

15

23191

Perform drilling calculations and reporting in a hydrocarbon drilling environment

4

7

23192

Carry out well control and blowout prevention in a hydrocarbon drilling environment

4

10

23194

Participate in nippling-up and pressure test in a hydrocarbon drilling environment

4

5

23195

Maintain drilling rig communications systems in a hydrocarbon drilling environment

4

4

23196

Manage equipment maintenance in a hydrocarbon drilling environment

4

4

23197

Maintain personnel management systems in a hydrocarbon drilling environment

4

8

23199

Participate in, lead and facilitate work teams in a hydrocarbon drilling environment

4

10

Engineering and Technology > Drilling Industry > Drilling - Non-hydrocarbon



ID

Title

Level

Credit

22496

Manage non-routine, complex technical situations in a non-hydrocarbon drilling environment

4

35


Core Elective

A minimum of 5 credits at Level 4 or above

From anywhere on the NQF
Off Shore Drilling Strand

The following standard is required


Engineering and Technology > Drilling Industry > Drilling - Hydrocarbon

ID

Title

Level

Credit

23189

Conduct pre-spud operations in a hydrocarbon drilling environment

3

6


On Shore Drilling Strand

The following standards are required


Engineering and Technology > Drilling Industry > Drilling - Hydrocarbon

ID

Title

Level

Credit

23193

Shut down rig in a hydrocarbon drilling environment

4

3

23198

Coordinate air drilling operations in a hydrocarbon drilling environment

4

7


Optional standards

The following standard is optional


Engineering and Technology > Drilling Industry > Drilling - Hydrocarbon

ID

Title

Level

Credit

23213

Assist in the transfer of passengers and freight during helicopter operations in a hydrocarbon drilling environment

2

6



Certification

The certificate will display the logos of NZQA and NZ Motor Industry Training Organisation (Incorporated).



Classification

This qualification is classified according to the NQF classification system and the New Zealand Standard Classification of Education (NZSCED) system as specified below.




DAS Classification

NZSCED

Code

Description

Code

Description

2043

Engineering and Technology > Drilling Industry > Drilling - Hydrocarbon

030303

Engineering and Related Technologies > Process and Resources Engineering > Mining and Resources Engineering


Quality Management Systems
Providers and Industry Training Organisations must be accredited by a recognised Quality Assurance Body before they can register credits from assessment against standards. Accredited providers and Industry Training Organisations assessing against standards must engage with the moderation system that applies to those standards. Accreditation requirements and the moderation system are outlined in the associated Accreditation and Moderation Action Plan (AMAP) for each standard.



NZ Motor Industry Training Organisation (Incorporated)

SSB Code 101542



MoE Code 9013

Ó New Zealand Qualifications Authority 2016





Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©azrefs.org 2016
rəhbərliyinə müraciət

    Ana səhifə