Holiday park




Yüklə 35.41 Kb.
tarix28.02.2016
ölçüsü35.41 Kb.



JERUSALEM CREEK MARINA

&

HOLIDAY PARK



Site Works Application

Updated June 2012





INDIVIDUAL

SITE WORKS APPLICATION


IMPORTANT
The following information must be completed and submitted to the holiday park and marina owner for approval before any works can be carried out.

Date _______________

Name __________________________________________________

Site Number _______________

Please tick the box for the improvement/s proposed.





Concrete Slab




Rigid Annexe




Eve or Verandah




Flyover




Patio/Deck




Shade Structure/Pergola




Shed




Paving




Cabin/Caravan




Other














Park Operator Approval : ……………………………………………………………….
Dated : ………………………………..
The following information is required in order for an application to be considered for approval.

The Site.


  1. The site length. …………..mm.

  2. The site width. …………..mm. Total ………… M2



The Concrete Slab.


Existing




(if yes points 5 to8 N/A)







  1. The slab length. …………….mm.

  2. The slab width. …………….mm. ………… M2




  1. The number of construction joints needed. ……………….

  2. The thickness of the slab overall. ………………..mm.

  3. The thickness of the slab around the edges. ………………..mm.

  4. The stability of the ground the slab is being poured onto. …………………




  1. Use for slab (please tick)

a) Placement of van and/or annexe







b) Patio/deck




c) Shade Structure/Pergola







d) Barbecue







  1. Amount of slab NOT covered by van, annexe or flyover ………… M2



The Caravan.


  1. The caravan length. …………..mm.

  2. The caravan width. …………..mm.

  3. The caravan height. …………..mm. ………… M2


The Annexe.


  1. The annexe length (excluding eaves or verandahs).………………………...mm.

  2. The annexe width (excluding eaves or verandahs). ………………………...mm.

  3. The manufacturers name and contact number ……………………………………..

(Manufacturers Compliance plate MUST be fitted to annexe).

  1. The material the annexe is to be constructed of .……………………………….….

  2. The overall size of the annexe (excluding eaves or verandahs) ………… M2



Eaves and Verandahs.
Verandahs may be located on either:

OR

  • The rear of the caravan and annexe and the longitudinal side of the annexe.




  1. The width of the eaves …..…………….mm.

  2. The length of the verandah (max 3600 mm) extending out from either the front or rear of the caravan and annexe .…...…..……….mm.

  3. The width of the verandah (max 3600 mm) on the longitudinal side….…….…....mm.

(must maintain a fall of 11 degrees or 150mm per 3600mm)

  1. The height of the verandah (min 2100 mm) on the longitudinal side……………..mm.

  2. The overall size of the eaves and/or verandahs.………… M2

  3. The overall size of the annexe and eaves…………..M2

  4. The overall size of the caravan, annexe and eaves…………..M2



The Flyover.


  1. The length of the flyover.……………………mm.

  2. The width of the flyover.……………………mm.

  3. The number of support posts (minimum 38mm inside diameter steel tube)…………...

  4. Concrete footings to be minimum …300mm x …300 mm x 350 mm deep.

  5. The material the flyover is to be made of.………………………………………

  6. Computations provided by:………………………………………………………

  7. The overall size of the flyover ..…………M2



Caravan, Annexe, Eaves, Verandahs & Flyover.


  1. The overall size of any combination of caravan, annexe, eaves, verandahs and flyover must be less than 80 M2 ….……….M2



Patio / Deck.


  1. The length of the deck ………………………………...mm.

  2. The width of the deck ………………………………...mm.

  3. The height of the deck ………………………………...mm.

  4. Decking constructed from ………………………………………………………

  5. Is the decking on skids or blocks Yes/No

  6. What are the skids manufactured from ……………………...………………

WHERE APPROVAL PREVIOUSLY GRANTED



  1. Dimension of stumps ……………mm x …………….mm.

  2. Depth of stumps below ground. ………………………………...mm.




  1. A limit of 20 square meters applies to hard standing surfacing in addition to the area covered by the Caravan, Annexe, Verandahs and Flyover.

  2. Area of patio/deck covered by verandahs and / or flyover .…………M2

  3. Area of patio/deck Not covered by verandahs and / or flyover .…………M2




  1. The overall size of the Patio/Deck. .…………M2



Shade Structure / Pergola.


  1. The length of the structure/pergola ….………mm

  2. The width of the structure/pergola ….………mm

  3. Maximum height of the structure/pergola ….………mm

  4. Minimum cross support beam height of structure/pergola ….………mm

  5. Constructed from either - Timber or Steel ……………..

  6. Construction material dimensions ……………………………………………….....

  7. Material used for covering structure/pergola …………..............................................

  8. Clearance between structure/pergola to site boundary (min 1000 mm) ….………mm

  9. Clearance between structure/pergola to caravan/annexe (min 1200 mm) .………mm



Shed.


  1. The length of the shed ….………mm

  2. The width of the shed ….………mm

  3. Maximum height of the shed ….………mm

  4. Constructed from either - Timber or Steel ……………..



Other.


  1. Details ……………………………………………………………………………………….

……………………………………………………………………………………………………

ATACHMENT A.
Date…………………….

Name……………………………………………………………………………

Site Number…..……

Application for………………………………………………………………………..


Site Plan

Show on plan:
Site length……………………………..mm;

Site Width………………………………mm;

Clearance from van and annexe to boundaries ………………………………….mm;

Location (and distances from fixed objects) of any structures e.g. verandahs, flyovers, patio/decks, pergolas,etc.

Clearance of trees from all structures.
Note: All information must be complete and accurate.



Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©azrefs.org 2016
rəhbərliyinə müraciət

    Ana səhifə