Corrigendum for Tender No. Cah/ ivbp / mach/ /2011/ Dated 15 /10/2011



Yüklə 7.43 Kb.
tarix27.02.2016
ölçüsü7.43 Kb.
Corrigendum for

Tender No. CAH/ IVBP / MACH/ /2011/ Dated 15 /10/2011


  1. On page 3/50 under Item no 1 Items under tender process for fixing rate contract in line six READ From the date of agreement till 30-06-2013. Instead of From the date of agreement till 30-06-2011

  2. On page 3/50 at NO 2 Eligibility for participation in tender process at point no b)

Read The items to be purchased must have ISI mark/ star ratings for quality standards wherever applicable Instead of The items to be purchased must have ISI mark/ star ratings for quality standards where specified.

  1. On page no 4/50 Point No 3 ( submission of inspection certificate of the samples). This point has been Deleted.

  2. On page no 6/50 In Technical Envelop T1 ….At the end of point 1 Add -- For items no 1 to 45 in annexure B- for Fermenter spare parts, tenderers having valid shop license must attach a copy of the valid shop license.

  3. On page no 6/50 In Technical Envelop T1 … After point X add point no XI- An undertaking that the tenderer will submit a Third party testing certificate for the items -1 to 11 under the tender in Annexure A from an NABL accredited laboratory or from a Government Engineering College.

  4. On page no 7/50 at point no 9 (How to quote rates ) at Point- a. The last line :- Read –The Institute of veterinary biological product ,Aundh, Pune will provide the Octroi exemption certificate. Instead of The department will not provide octroi exemption certificate

  5. At item no -18 (quality control). Point b. Read Items from Sr. No. 1 to 11 in Annexure A supplied shall be tested by the Government College of Engineering or NABL accredited laboratory. Instead of items from Sr. No. 1 to 11 in Annexure A supplied shall be tested

by the College of Engineering, Pune.

  1. On Page no 16/50 for item no 4 programmable orbital shaker. The last line should be read as Necessary voltage stabilizer to be provided with the system. Instead of Necessary voltage stabilizer to be provided with the sy.

  2. On page 13/50 for item no I Bio safety Cabinet Class II Type B-2 .At the end read The said instrument has to be assembled on site at the clean room of IVBP. The dimension should be read as A) 5 feet Long ; B) 4 feet long

  3. On page 13/50 for item no I Bio safety Cabinet Class II Type B-2 .At the end the said instrument has to be assembled on site at the clean room of IVBP.

  4. On page 14/50 for item no 2 Bacterial Incubator GMP-model .. Read all the “ 0C “ at the end of temperatures as OC .

  5. On page 18/50 for item no 6 CO2 Incubator GMP-model .. Read all the “ 0C “ at the end of temperatures as OC.

  6. On page 22/50 for item no 9 Laminar Air Flow Transport System ( Mobile Cart) at the end of specification introduce the Dimensions (entire balance) W x D x H = 2 x2 x2 feet.

  7. On page 49/50 in Annexure checklist E – Read it as An undertaking that the tenderer will submit a Third party testing certificate for the items -1 to 11 under the tender in Annexure A from an NABL accredited laboratory or from a Government Engineering College.

  8. On page 49/50 in Annexure checklist E. Point No5 .( Receipt of the tender sample submitted for inspection ) is deleted.

  9. Items mentioned in Annexure –A of items at serial nos. 1,2,6 and 7 need to be assembled at the site inside the clean room facility. The approved tenderer will be responsible for erecting / commissioning of these items to the satisfaction of the indenting party. The approved tenderer will have to bear the complete cost of such erecting / commissioning. He can visit the site (IVBP-Aundh, Pune) on any working day during the office hours.

Commissioner of A.H



Pune-7
Kataloq: tnduploads

Yüklə 7.43 Kb.

Dostları ilə paylaş:




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©azrefs.org 2020
rəhbərliyinə müraciət

gir | qeydiyyatdan keç
    Ana səhifə


yükləyin