Tia (only) Documents Project Number (PN)




Yüklə 24.69 Kb.
tarix11.03.2016
ölçüsü24.69 Kb.




TIA (only) Documents

Project Number (PN)

Explanation

Published Standard Number

TIA-PN-1234

1st (Letter) Ballot

TIA-1234-

TIA-PN-1234-D1

1st Default Ballot, subsequent default ballots are designated in a numerical, sequential manner (e.g., TIA-PN-1234-D2)

TIA-1234-

TIA-PN-1234-R1

1st Re-Ballot, subsequent re-ballots are designated in a numerical, sequential manner (e.g., TIA-PN-1234-R2)

TIA-1234-

TIA-PN-1234-1

Addendum 1 to TIA-1234

TIA-1234-1-

TIA-PN-1234-2

Addendum 2 to TIA-1234

TIA-1234-2-

TIA-PN-1234-A

Revision 1 of TIA-12341

TIA-1234-A-

TIA-PN-1234-B

Revision 2 of TIA-1234

TIA-1234-B-

TIA-PN-1234-A-1

Addendum 1 to TIA-1234-A

TIA-1234-A-1-

TIA-PN-1234-A-2

Addendum 2 to TIA-1234-A

TIA-1234-A-2-

TIA-PN-1234-B-1

Addendum 1 to TIA-1234-B

TIA-1234-B-1-

TIA-PN-1234-B-2

Addendum 2 to TIA-1234-B

TIA-1234-B-2-

TIA-PN-1234.001

Part/chapter 1 of TIA-PN-TIA-12342

TIA-1234.001-




ANSI/TIA Documents

Project Number (PN)

Explanation

Published Standard Number

ANSI/TIA-PN-1234

1st (Letter) Ballot

ANSI/TIA-1234-

ANSI/TIA-PN-1234-D1

1st Default Ballot, subsequent default ballots are designated in a numerical, sequential manner (e.g., ANSI/TIA-PN-1234-D2)

ANSI/TIA-1234-

ANSI/TIA-PN-1234-R1

1st Re-Ballot, subsequent re-ballots are designated in a numeric, sequential manner (e.g., ANSI/TIA-PN-1234-R2)

ANSI/TIA-1234-

ANSI/TIA-PN-1234-1

Addendum 1 to ANSI/TIA-1234

ANSI/TIA-1234-1-

ANSI/TIA-PN-1234-2

Addendum 2 to ANSI/TIA-1234

ANSI/TIA-1234-2-

ANSI/TIA-PN-1234-A

Revision 1 of ANSI/TIA-1234

ANSI/TIA-1234-A-

ANSI/TIA-PN-1234-B

Revision 2 of ANSI/TIA-1234

ANSI/TIA-1234-B-

ANSI/TIA-PN-1234-A-1

Addendum 1 to ANSI/TIA-1234-A

ANSI/TIA-1234-A-1-

ANSI/TIA-PN-1234-A-2

Addendum 2 to ANSI/TIA-1234-A

ANSI/TIA-1234-A-2-

ANSI/TIA-PN-1234-B-1

Addendum 1 to ANSI/TIA-1234-B

ANSI/TIA-1234-B-1-

ANSI/TIA-PN-1234-B-2

Addendum 2 to ANSI/TIA-1234-B

ANSI/TIA-1234-B-2-

ANSI/TIA-PN-1234.001

Part/chapter 001 of ANSI/TIA-PN-TIA-1234

ANSI/TIA-1234.001-



  • All documents will have one (1) number throughout its lifecycle…from project inception through publication and subsequent updates.




  • The “SP” designation for all standards that are intended to be ANSI/TIA standards is no longer used. All documents, during its development, will use the “PN” (Project Number) designation.




  • Technical Standards Bulletins (TSBs) will follow the numbering scheme outlined for TIA (only) documents. “TIA” will be replaced with “TSB” in all instances.




  • The new TIA document numbering scheme will be used on a “moving forward” basis (i.e., all current standards will not be assigned a new document number).




1 When a document is revised, it shall incorporate all addenda from the previous revision, as well as any additional changes made by the committee. For example, if TIA-1234 has two (2) addenda (TIA-1234-1 and TIA-1234-2), TIA-1234-A will incorporate the two addenda and any additional changes made by the committee.

2 A multi-part document must have a core document against which chapters/parts are published. This core document shall have the suffix “.000” (e.g., TIA-1234.000). Each part can be balloted separately and revised separately; however, the core document must be updated appropriately to reflect the changes made to the parts.

Updated: 7 June 17 August 2010

For inclusion in the 5th Edition of the TIA Engineering Manual




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©azrefs.org 2016
rəhbərliyinə müraciət

    Ana səhifə