1. Release version and download file name.
The released program version and download file name are as follows.
*1. bizhub PRESS 1250/1250P/1052 and PRO 951 are common programs.
*2. The program of PRO 951 is different from it of bizhub PRESS 1250/1250P/1052.
*3. Taiwan and Korea specification is only PRO951.
*4. This program is same as the program that already released in TNBT1299640.
*5. The related optional firmware is released in DLBT1201232 separately.
European spec.
* A4EU021-00I3-G00-1510.doc (English PRI: This file)
2. About the program.
This is the mass production outset version of bizhub PRESS 1250 series.
For PRO 951, image control program and print control program are version up.
2.1. As for the Web browser program (W1), installation is possible to the machine which installed UK-205.
2.2. For PRO 951, it changed the following item from Version 11 of image control and print control.
2.2.1. Newly added function/change of specifications.
2.2.1.1. Supported the accounting system (equiTrack, SafeQ, Erie) whitch put off the support in version 11.
2.2.2. Correction of malfunctions.
2.2.2.1. In the Fold&Staple mode (FS-532) of the printer job, job stops when over the limit of number of sheets.
2.2.2.2. In the copy mode, cannot output of Half Fold/Fold&Staple to ISOB5R paper.
2.2.2.3. Can not select the PK punch, when by configuration of GP-501 and PK-522 without IP-502.
2.2.2.4. The parts number of Special Parts displayed on the operation panel is different from the parts number actually in use.
3. Restriction.
There are following restriction in this version.
3.1. By configuration of LS and FS (with PK), when printer job with punch and auto tray, the first page is ejected to main tray of LS without punch hole.
Workaround: Specify the exit tray and print.
Temporary measures: It will release the special firmware that corrected malfunction in the beginning of July, 2012.
Permanent measures: it will release the mass production firmware that corrected malfunction in December, 2012.
3.2. When it specified sample print by the continuous jobs of both sides print in the section top, when first job is except the ring bind and 2nd job is ring bind, it became jam occur sample print of 2nd job.
Workaround: Do set of the sample print with the middle of job.
Temporary measures: It will release the special firmware that corrected malfunction in the beginning of July, 2012.
Permanent measures: it will release the mass production firmware that corrected malfunction in December, 2012.
4. Programs to be applied at the same time.
Apply each firmware released this time.
When update the PRO 951, it necessary to apply IC controller firmware version 15 (P1 G00-15).
C-C136 is displayed when versions are different. (P1 G00-15 is downloadable in DLBT1201223, DLBT1201225)
5. How to install.
5.1. How to update the firmware.
You can install firmware to machine by USB-ISW.
Please refer to the service manual for the detailed procedure of the firmware installation.
[USB memory directory configuration]
PRESS M1250+---I+---I0 (Image control program: Package)
| +---I3 (Image control program: Individual I3)
Please refer to the Service Manual for the detailed information.
5.2. How to check version.
You can check the version in the service mode, 08: ROM version.
Please refer to the Service Manual for the detailed procedure.
6. Latest program combinations.
Combinations of bizhub PRESS 1250 series, bizhub PRO 951 and other latest program version are as follows.
Product name
|
Program name
|
Ver.
|
Note
|
bizhub PRESS 1250/1250P/1052, bizhub PRO 951
|
Print control program
|
G00-15
|
Released this time.
|
bizhub PRESS 1250/1250P/1052, bizhub PRO 951
|
Image control program
|
G00-15
|
Released this time.
|
bizhub PRESS 1250/1250P/1052, bizhub PRO 951
|
Sound program
|
G00-10
|
This firmware is included in this DL, but it is same as program released in DLBT1200640.
|
bizhub PRESS 1250/1250P/1052, bizhub PRO 951
|
Web browser program
|
G00-10
|
This firmware is included in this DL, but it is same as program released in DLBT1200640.
|
DF-615
|
DF-615 control program
|
G00-10
|
Released this time.
For only PRESS 1250 series.
|
DF-616
|
DF-616 control program
|
G00-10
|
For only PRO 951.
|
ZU-608
|
ZU-608 control program
|
G00-10
|
For only PRO 951.
|
RU-510
|
RU-510 control program
|
G00-10
|
Released separately by DLBT1201232.
For PRESS 1250 siries.
|
RU-508/509
|
RU-508/509 control program
|
G00-20
|
Released separately by DLBT1201232.
For PRESS 1250 siries.
|
FD-503
|
FD-503 control program
|
G00-60
|
Released separately by DLBT1201232.
For PRESS 1250 series.
|
SD-506
|
SD-506 control program
|
G00-60
|
Released separately by DLBT1201232.
For PRESS 1250 series.
|
SD-510
|
SD-510 control program
|
G00-10
|
Released separately by DLBT1201232.
|
LS-505
|
LS-505 control program
|
G00-60
|
Released separately by DLBT1201232.
For PRESS 1250 series.
|
PB-503
|
PB-503 control program
|
G00-50
|
Released separately by DLBT1201232.
For PRESS 1250 series.
|
GP-501
|
GP-501 control program
|
G00-50
|
Released separately by DLBT1201232.
For PRESS 1250 series.
|
FS-532
|
FD-532 control program
|
G00-15
|
Released separately by DLBT1201232.
|
bizhub PRESS 1250/1250P/1052. bizhub PRO 951
|
IC control program
|
G00-15
|
Released separately by DLBT1201223 and DLBT1201225.
|
* OpenAPI supported function level
The following is OpenAPI supported function level on this firmware.
OpenAPI:
-
OpenAPI Function Level
|
3.7
|
Detail:*
-
Supported applications
|
Ver.
|
Note
|
eCopy
|
4.6 and 5.0
|
|
SafeQ
|
3.6.2
|
Correspond to only the native version (None browser version)
|
Equitrac
|
4.2
|
|
PageScope Authentication Manager
|
2.3
|
|