Nzqf nq ref 1514 Version




Yüklə 152.01 Kb.
tarix16.04.2016
ölçüsü152.01 Kb.

NZQF NQ Ref

1514

Version

3

Page of

powerpluswatermarkobject1073108025


National Diploma in Electrical Engineering (Advanced Trade) (Level 5) with strands in Electrotechnology Specialisation, Electrical Installation, and Industrial Electrical Engineering

Level

5

Credits

130

This qualification has been reviewed. The last date to meet the requirements is 31 December 2021.



Transition Arrangements

This qualification has been reviewed and replaced by the New Zealand Certificate in Electrical Engineering (Level 5) [Ref: 2384].


The last date for entry into programmes leading to this qualification is 31 December 2016.
For detailed information see Review Summaries on the NZQA website.
This qualification contains a standard that has been replaced by later standards. Reverse transition has been included in this qualification so people can complete the qualification using either the expiring standard or replacement standards.
For the purpose of this qualification, people who have gained credit for the replacement standards are exempt from the requirement to gain credit for the expiring standard – see table below.


Credit for

Exempt from

27520, 27521

25463



NZQF National Qualification Registration Information





Process

Version

Date

Last Date for Assessment

Registration

1

October 2009

December 2012

Revision

2

October 2011

December 2021

Review

3

November 2014

December 2021



Standard Setting Body

The Skills Organisation

FREEPOST 5164

PO Box 24469

Royal Oak

Auckland 1345


Telephone 09 525 2590

Email reviewcomments@skills.org.nz




National Diploma in Electrical Engineering (Advanced Trade) (Level 5) with strands in Electrotechnology Specialisation, Electrical Installation, and Industrial Electrical Engineering





Level

5

Credits

130



Purpose

This vocational qualification is for qualified electricians who wish to develop their electrical, business, and overall leadership knowledge and skills and gain a qualification at an advanced trade level that builds on the National Certificate in Electrical Engineering (Advanced Trade) (Level 5) with strands in Electrotechnology Specialisation, Electrical Installation, and Industrial Electrical Engineering [Ref: 0951]. This qualification provides further applied development of management and project management skills along with specific industry skills, including the final phase of the electrical inspector training which is contained in the elective section.


The qualification prepares trainees for a wide range of roles in the electrotechnology, electrical contracting, or industrial electrical engineering sectors at management level, and comprises three sections. The first section is compulsory and covers advanced electrical theory and trade practice. The second is an elective section which allows for a wide choice of applied study in the area of electrical engineering, business, and management. The third section comprising three strands which allows choice of standards to reflect the varied environments in which electricians are employed. At least one of these strands must be completed for award of the qualification.
Typically, the qualification will be gained during the course of a three to four-year training part-time programme. Holders of this qualification have a range of knowledge and skills assessed both off-job (during courses conducted by training providers with consent to assess) and applied on-job (in the workplace).
The qualification is available in three strands reflecting the major sectors of work within the industry as follows:

  • Electrotechnology Specialisation – a choice of broader electrotechnology subjects, at a more academic level for people who are involved in electrotechnology design, or to allow trainees to specialise in their chosen field of expertise not specifically covered by the elective section or the other strands.

  • Electrical Installation – customer energy solution, electrical switchgear and switchboards, electrical installation practice, standby power plant, lighting installations, and building management systems; and

  • Industrial Electrical Engineering – industrial measurement and control, programmable logic controllers, commissioning and handover of electrical engineering projects, electrical machine safety systems, and commission and re-commissioning of plant.

The compulsory section of the qualification covers knowledge and skills relating to:



  • project planning and management and quotation preparation;

  • CAD tools;

  • financial management for a small business;

  • electrical circuit protection;

  • non-electrical legislation;

  • the inspection and certification of electrical installations;

  • energy efficiency and related emerging technology; and

  • hazard identification.

The elective section includes:



  • planning and allocation of work;

  • procurement of supplies;

  • budgeting;

  • designing trainee assessment and assessing trainees;

  • advanced electrical testing and measurement;

  • energy audits;

  • development and implementation of maintenance plans;

  • electrical inspection;

  • maintenance planning; and

  • project estimates.

As this qualification shares credit with the National Certificate in Electrical Engineering (Advanced Trade) (Level 5) with strands in Electrotechnology Specialisation, Electrical Installation, and Industrial Electrical Engineering [Ref: 0951], trainees may apply for that certificate once they have completed the relevant standards.


The qualification has some credits in common with, and can lead to, the National Diploma in Engineering (Electrotechnology) (Level 6) [Ref: 1313].

Special Notes

1 Trainees are encouraged to commence the applied study component of the National Diploma in Electrical Engineering (Advanced Trade) (Level 5) with strands in Electrotechnology Specialisation, Electrical Installation, and Industrial Electrical Engineering [Ref: 1514] during study towards the National Certificate in Electrical Engineering (Advanced Trade) (Level 5) with strands in Electrotechnology Specialisation, Electrical Installation, and Industrial Electrical Engineering [Ref: 0951]. The applied study component is contained in the Elective section of the diploma.


2 Trainees should note that Unit 25635, Develop, implement, and review maintenance plans for electrical engineering systems, is designed to be a capstone standard which would best be completed towards the end of a programme of learning.
3 Applications for Recognition of Prior Learning (RPL) or Recognition for Current Competency (RCC), supported by appropriate documentation, should be made either to ElectroTechnology Industry Training Organisation (ETITO) or to a training provider with consent to assess.
4 Before commencing study towards this qualification it is recommended that candidates either hold at least one of the following qualifications or registrations:

  • National Certificate in Electrical Engineering (Electrician for Registration) (Level 4) [Ref: 1195];

  • National Certificate in Electrical Engineering (Electrician) (Level 4) [Ref: 0313];

  • Trade Certificate in Electrical Wiring; or

  • the National Certificate in Electricity Supply (Electrical) (Level 4) with strands in Electricity Supply Electrician, Electrical Fitter, and Electrical Technician [Ref: 1295]; or

  • Registration as an Electrician;

or are working towards one of the following qualifications:

  • National Certificate in Electrical Engineering (Electrician for Registration) (Level 4) [Ref: 1195]; or

  • the National Certificate in Electricity Supply (Electrical) (Level 4) with strands in Electricity Supply Electrician, Electrical Fitter, and Electrical Technician [Ref: 1295].



Credit Range








Compulsory

Elective

Balance set

Level 3 credits

9

-

0-1

Level 4 credits

10

0-6

0-30

Level 5 or above credits

26

14-20

0-30

Minimum totals

45

20

0-30







Electrotechnology Specialisation Strand

Electrical Installation Strand

Industrial Electrical Engineering Strand

Level 3 credits

-

-

-

Level 4 credits

-

13

15

Level 5 or above credits

45

34

20

Minimum totals

45

47

35

Qualification total with strand

130

130

130



Requirements for Award of Qualification





Award of NZQF National Qualifications
Credit gained for a standard may be used only once to meet the requirements of this qualification.
Unit standards and achievement standards that are equivalent in outcome are mutually exclusive for the purpose of award. The table of mutually exclusive standards is provided on the New Zealand Qualifications Authority (NZQA) website: http://www.nzqa.govt.nz/qualifications-standards/standards/standards-exclusion-list/.
Reviewed standards that continue to recognise the same overall outcome are registered as new versions and retain their identification number (ID). Any version of a standard with the same ID may be used to meet qualification requirements that list the ID and/or that specify the past or current classification of the standard.



Summary of Requirements





  • A minimum of 130 credits

 Of which a minimum of 120 credits at Level 4 or above

 Of which a minimum of 72 credits at Level 5 or above



  • Compulsory standards

  • Elective – A minimum of 20 credits as specified

One of the following strands is required



  • Electrotechnology Specialisation Strand

  • Electrical Installation Strand

  • Industrial Electrical Engineering Strand




  • Balance set – Balance



Detailed Requirements



Compulsory

The following standards are required


Business > Financial Management > Financial Skills

ID

Title

Level

Credit

18956

Demonstrate knowledge of financial management for an entity

3

5

Engineering and Technology > Electrical Engineering > Electrical Installation and Maintenance



ID

Title

Level

Credit

19001

Demonstrate advanced knowledge of electrical circuit protection

5

3

19008

Prepare quotations for electrical work

5

5

Engineering and Technology > Electrical Engineering > Electrical Standards and Statutes



ID

Title

Level

Credit

19009

Apply non-electrical legislation in the electrical industry

5

4

25638

Demonstrate knowledge of inspection and certification of electrical work

5

8

Engineering and Technology > Electrical Engineering > Electrotechnology



ID

Title

Level

Credit

4993

Plan implementation of, manage, and review small to medium sized electrotechnology projects

5

6

16974

Demonstrate and apply knowledge of CAD tools as used in an electrotechnology engineering environment

4

5

25630

Demonstrate knowledge of and analyse energy efficiency of buildings and plant

4

5

Health > Occupational Health and Safety > Occupational Health and Safety Practice



ID

Title

Level

Credit

17602

Apply hazard identification and risk assessment procedures in the workplace

3

4


Elective

A minimum of 20 credits


Business > Business Operations and Development > People Development and Coordination

ID

Title

Level

Credit

25463

Manage a plan to achieve organisational objectives

5

10

Business > Business Operations and Development > Quality Management



ID

Title

Level

Credit

7459

Develop, manage, and evaluate improvements to products, services, and systems

6

10

Business > Business Operations and Development > Systems and Resources Management



ID

Title

Level

Credit

7461

Plan procurement of material, plant and equipment supplies

6

10

Education > Generic Education and Training > Assessment of Learning



ID

Title

Level

Credit

4098

Use standards to assess candidate performance

4

6

11552

Design assessment

5

6

Engineering and Technology > Electrical Engineering > Electrical Installation and Maintenance



ID

Title

Level

Credit

25635

Develop, implement, and review maintenance plans for electrical engineering systems

5

15

25636

Manage testing and measuring procedures within electrical engineering contexts

5

5

25637

Develop a plan for and manage an electrical engineering project

5

20

25639

Develop resource procurement options for a significant electrical project and make recommendations

5

5

Engineering and Technology > Electrical Engineering > Electrical Standards and Statutes



ID

Title

Level

Credit

25640

Inspect and certify electrical work

5

6

Engineering and Technology > Engineering > Generic Engineering



ID

Title

Level

Credit

11405

Prepare estimates of engineering project costings

5

4


Electrotechnology Specialisation Strand

A minimum of 45 credits at Level 5 or above




Field

Subfield

Domain

Engineering and Technology

Electrical Engineering

Electrotechnology

Electronic Engineering

Computer Engineering

Electronic Manufacturing

Mechanical Engineering

Any

Telecommunications

Any

Explosive Atmospheres

Any


Electrical Installation Strand

The following standards are required


Engineering and Technology > Electrical Engineering > Electrical Installation and Maintenance

ID

Title

Level

Credit

19002

Demonstrate advanced knowledge of electrical switchgear and switchboards

5

5

19004

Demonstrate knowledge of standby power plant

5

4

19006

Design simple electric lighting installations

5

5

25631

Demonstrate knowledge of and design documentation for the commissioning of significant electrical installations

5

5

25634

Demonstrate advanced knowledge of electrical installation practice and knowledge of data communication principles

5

10

25639

Develop resource procurement options for a significant electrical project and make recommendations

5

5

Engineering and Technology > Electrical Engineering > Electrotechnology



ID

Title

Level

Credit

25629

Demonstrate introductory knowledge of building management systems

4

5

Engineering and Technology > Electricity Supply > Electricity Supply - Utilisation



ID

Title

Level

Credit

14191

Undertake a preliminary analysis and interpretation of customer energy solution

4

8


Industrial Electrical Engineering Strand

The following standards are required


Engineering and Technology > Electrical Engineering > Electrical Installation and Maintenance

ID

Title

Level

Credit

25631

Demonstrate knowledge of and design documentation for the commissioning of significant electrical installations

5

5

Engineering and Technology > Electronic Engineering > Core Electronics



ID

Title

Level

Credit

22727

Demonstrate and apply intermediate knowledge of programmable logic controller engineering applications

5

15

Engineering and Technology > Industrial Measurement and Control > Industrial Measurement and Control - Theory



ID

Title

Level

Credit

2654

Demonstrate knowledge of on/off and proportional integral derivative mode control theory and controllers

4

8

24887

Demonstrate knowledge of electronic variable speed drives

4

3

Health > Occupational Health and Safety > Occupational Health and Safety Practice



ID

Title

Level

Credit

18410

Manage hazard identification and control on plant and machinery

4

4


Balance set

The balance of credits to achieve

A minimum of 130 credits


  • Of which a minimum of 120 credits at Level 4 or above

  • Of which a minimum of 72 credits at Level 5 or above

May come from the following sets

  • Balance standards

  • Balance credits at Level 3 or above

  • Balance credits at Level 4 or above

  • Balance credits at Level 5 or above


Balance standards
Engineering and Technology > Electrical Engineering > Electrical Installation and Maintenance

ID

Title

Level

Credit

25631

Demonstrate knowledge of and design documentation for the commissioning of significant electrical installations

5

5

25632

Demonstrate and apply advanced knowledge of the selection, use, and care of complex electrical measuring equipment

5

5

Engineering and Technology > Electrical Engineering > Electrotechnology



ID

Title

Level

Credit

25633

Demonstrate and apply knowledge of energy audits and emerging developments in energy efficiency

5

10


Balance credits at Level 3 or above

A minimum of 0 credits at Level 3 or above




Field

Subfield

Domain

Business

Business Environment

Business Culture and Environment

Engineering and Technology

Electricity Supply

Electricity Supply - Core Skills

Electricity Supply - Distribution Networks

Electricity Supply - Live Work

Industrial Measurement and Control

Industrial Measurement and Control - Maintenance

Humanities

Communication Skills

Interpersonal Communications


Balance credits at Level 4 or above

A minimum of 0 credits at Level 4 or above




Field

Subfield

Domain

Business

Business Operations and Development

Systems and Resources Management

Financial Management

Financial Skills

Engineering and Technology

Electricity Supply

Electricity Supply - Utilisation


Balance credits at Level 5 or above

A minimum of 0 credits at Level 5 or above




Field

Subfield

Domain

Business

Business Operations and Development

People Development and Coordination

Engineering and Technology

Electrical Engineering

Electrical Installation and Maintenance

Electricity Supply

Electricity Supply - Power System Management

Electronic Engineering

Core Electronics

Transition Arrangements




Version 2

Version 2 was issued following revision in order to maintain achievability for candidates. The revision reflects changes to classifications, and amendment to the title, credit value and level of one standard.


Changes to structure and content

  • Removed the Electrical Equipment in Hazardous Areas domain from the Electrotechnology Specialisation Strand because it had been designated expiring.

  • Removed the Electronic Installation and Maintenance domain from the Electrotechnology Specialisation Strand because there were no Level 5 standards from which to choose.

  • Added the Explosive Atmospheres subfield to the Electrotechnology Specialisation Strand to meet current industry needs.

  • Removed expiring standards 8505 and 15560.

  • Amended the title, credit value and level of unit standard 18956.

For detailed information see Review Summaries on the NZQA website.


Trainees may either complete the requirements of version 1 or transfer to version 2.
This qualification contains standards that replace earlier standards. For the purposes of this qualification, people who have gained credit for the expiring standards are exempt from the requirement to gain credit for the replacement standards – see table below.


Credit for

Exempt from

19007

25641

19014

25638, 25640

This qualification contains classifications that replaced earlier classifications.  For the purposes of this qualification people with credit for standards listed in the lapsing domains can use them to meet the relevant qualification elective requirements - see table below.




Credit for

Exempt from

Engineering and Technology > Electrical Engineering > Electrical Equipment in Hazardous Areas

Engineering and Technology > Explosive Atmospheres

Business > Management > First Line Management

Business > Business Operations and Development > People Development and Coordination

Business > Management > First Line Management

Business > Business Operations and Development > Systems and Resources Management

Business > Management > First Line Management

Business > Financial Management > Financial Skills

Business > Management > First Line Management

Humanities > Communication Skills > Interpersonal Communications

Business > Management > Management - Developing and Coordinating People

Business > Business Operations and Development > People Development and Coordination

Business > Management > Small Business Management

Business > Business Environment > Business Culture and Environment

Business > Management > Small Business Management

Business > Business Operations and Development > Systems and Resources Management

Business > Management > Small Business Management

Business > Financial Management > Financial Skills

Engineering and Technology > Electricity Supply > Electricity Networks

Engineering and Technology > Electricity Supply > Electricity Supply - Core Skills

Engineering and Technology > Electricity Supply > Electricity Networks

Engineering and Technology > Electricity Supply > Electricity Supply - Distribution Networks

Engineering and Technology > Electricity Supply > Electricity Networks

Engineering and Technology > Electricity Supply > Electricity Supply - Live Work

Engineering and Technology > Electricity Supply > Electricity Utilisation

Engineering and Technology > Electricity Supply > Electricity Supply - Utilisation

Engineering and Technology > Electricity Supply > Power System Management

Engineering and Technology > Electricity Supply > Electricity Supply - Power System Management

Engineering and Technology > Electronics Technology

Engineering and Technology > Electronic Engineering

It is not intended that anyone is disadvantaged by this revision and the above arrangements have been designed for a smooth transition.  However, anyone who feels they have been disadvantaged may appeal to ETITO at the address below.



Previous versions of the qualification

This qualification was developed in conjunction with the review of the National Certificate in Electrical Engineering (Level 5) [Ref: 0951] version 4 following a major review of competency training. This was carried out by the electrical industry during 2008, which resulted in many standards being revised, replaced or removed from that qualification. The review reflected the experience of several years of training, assessment, and industry experience and took into account the anticipated future skill requirements of the industry.


The industry saw the need for a diploma at Level 5 to build on the National Certificate in Electrical Engineering (Advanced Trade) (Level 5) with strands in Electrotechnology Specialisation, Electrical Installation, and Industrial Electrical Engineering [Ref: 0951] in order to encourage practitioners to further develop their electrical, business, management, electrotechnology project management, and overall leadership knowledge and skills beyond the certificate requirements and have this recognised in a qualification.
Some content of this qualification is based on components removed from Ref: 0951 at review. Candidates may wish to transition directly from Ref: 0951 to Ref: 1514. For those that do, the similarities in structure and content include

  • The elective section from Ref: 0951 was moved to Ref: 1514 and restructured as an elective and balance set.

  • Standards 19001, 19008, and 19009 from the compulsory section of Ref: 0951 are also included in the compulsory section of Ref: 1514.

  • Standard 19002 from the compulsory section of Ref: 0951 was also included in the Electrical Installation strand of Ref: 1514.



Other standard setting bodies whose standards are included in the qualification

Electricity Supply Industry Training Organisation

Infratrain New Zealand

New Zealand Industry Training Organisation

NZQA

Certification

This certificate will display the logos of NZQA, ETITO and the organisation that has been granted consent to assess against standards that meet the requirements of the qualification (accredited).



Classification

This qualification is classified according to the classification system listed on the Directory of Assessment Standards (DAS) and the New Zealand Standard Classification of Education (NZSCED) system as specified below.




DAS Classification

NZSCED

Code

Description

Code

Description

204

Engineering and Technology > Electrical Engineering

031301

Engineering and Related Technologies > Electrical and Electronic Engineering and Technology > Electrical Engineering




Quality Management Systems

Providers and Industry Training Organisations must be granted consent to assess by a recognised Quality Assurance Body before they can register credits from assessment against standards. Organisation with consent to assess and Industry Training Organisations assessing against standards must engage with the moderation system that applies to those standards. Consent to assess requirements and the moderation system are outlined in the associated Consent and Moderation Requirements (CMR) for each standard.




Prerequisite Diagram




The Skills Organisation

SSB Code 100401



Ó New Zealand Qualifications Authority 2016





Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©azrefs.org 2016
rəhbərliyinə müraciət

    Ana səhifə