Nzqa registered unit standard 2048 version 6




Yüklə 32.01 Kb.
tarix18.04.2016
ölçüsü32.01 Kb.

NZQA registered unit standard

2048 version 6




Page of




Title

Reglaze frames

Level

4

Credits

5




Purpose

This unit standard is for experienced people working in the glazing industry.
People credited with this unit standard are able to: prepare for reglazing; complete de-glazing; and reglaze frames.




Classification

Glass and Glazing > Flat Glass




Available grade

Achieved


Explanatory notes
1 Definitions

Worksite requirements refer to instructions to staff on policy and procedures which are documented in memo or manual format and are available in the workplace. These requirements include – company specifications and procedures, work instructions, manufacturer’s specifications, product quality specifications, legislative requirements.

PVC – Polyvinyl Chloride.
2 Legislation and standards relevant to this unit standard include – Building Act 2004, Health and Safety in Employment Act 1992, New Zealand Standard (NZS) 4223.3:1999 Glazing in buildings – Human impact safety requirements, available at http://www.standards.co.nz.
3 Range

This unit standard applies to annealed, toughened and laminated glass and Insulating Glass Units (IGUs).


Outcomes and evidence requirements
Outcome 1
Prepare for reglazing.
Evidence requirements
1.1 Customer’s requirements are confirmed before work begins in accordance with worksite requirements.
Range requirements include – interpret job documents, measure, determine glass type, determine work force and site access requirements.
1.2 All necessary equipment, tools, and installation materials are checked and assembled before work begins in accordance with worksite requirements.
1.3 Work area is prepared to prevent damage to surrounding area and protect public safety in accordance with worksite requirements.
Range surrounding area includes – furnishings, fixtures and fittings, exterior surfaces;

public safety includes – warning signs, barriers or cordons.


Outcome 2
Complete de-glazing.
Evidence requirements
2.1 Damaged glass is removed and rebate cleared of material without injury to personnel or damage to framing in accordance with worksite requirements.
Range material include – putty, sprigs, clips, tapes, sealants, beads.
2.2 Waste glass is disposed of in accordance with worksite requirements.
2.3 Rebates are prepared for glazing in accordance with worksite requirements.
Range rebates include – metal, wooden, aluminium, frames and doors, PVC.
2.4 Glass is selected to match framing and situation in accordance with legislative requirements.
2.5 Glazing method is selected for compatibility with the frame in accordance with worksite requirements.
Outcome 3
Reglaze frames.
Evidence requirements
3.1 Rebate is checked before reglazing in accordance with worksite requirements.
Range checks include – obstruction free, clean, dry, primed and/or sealed, compatibility with glazing material, compatibility with glazing system.
3.2 Setting blocks, location blocks, and distance pieces are positioned in accordance with legislative requirements.
3.3 Glass is cut within tolerances advised by the manufacturer for glass type and situation in accordance with regulatory and worksite requirements.
3.4 Glass fixing method meets industry standards for glass type and situation.
Range fixing methods include – putty, sprigs, brads, beads, clips, wedges, gaskets, tapes, sealants.
3.5 Reglazing is carried out and checked to ensure it is free from imperfections in accordance with worksite requirements.
Range imperfections include – scratches, damaged edges, bead damage, frame damage, pane movement.
3.6 Operations are completed without injury to personnel or damage to products and equipment in accordance with the job specifications and worksite requirements.
3.7 Reglazing is cleaned and work area is clear and cleaned in accordance with worksite requirements.
3.8 Customer is advised of any relevant painting maintenance requirements in accordance with worksite requirements.



Planned review date

31 December 2020


Status information and last date for assessment for superseded versions

Process

Version

Date

Last Date for Assessment

Registration

1

11 June 1995

31 December 2013

Revision

2

5 February 1997

31 December 2013

Revision

3

20 December 1999

31 December 2013

Review

4

27 April 2004

31 December 2013

Review

5

21 May 2010

31 December 2017

Review

6

18 June 2015

N/A




Consent and Moderation Requirements (CMR) reference

0048

This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note

Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.


Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Building and Construction Industry Training Organisation info@bcito.org.nz if you wish to suggest changes to the content of this unit standard.


Building and Construction Industry Training Organisation

SSB Code 101562



Ó New Zealand Qualifications Authority 2016





Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©azrefs.org 2016
rəhbərliyinə müraciət

    Ana səhifə