Nzqa registered unit standard 1588 version 7




Yüklə 33.89 Kb.
tarix16.04.2016
ölçüsü33.89 Kb.

NZQA registered unit standard

1588 version 7




Page of




Title

Clean windows using abseiling technique

Level

4

Credits

12




Purpose

This unit standard is for people in the cleaning industry who wish to acquire specialist skills in window cleaning.
People credited with this standard are able to: prepare worksite and equipment; clean the windows using abseiling technique; and complete job-related tasks.




Classification

Cleaning and Caretaking > Window Cleaning




Available grade

Achieved


Explanatory notes
1 Competence demonstrated during assessment against this standard must comply with the requirements of:

Building Act 2004;

Employment Relations Act 2000;

Health and Safety in Employment Act 1992;

Resource Management Act 1991;

AS/NZS 1891 Set Industrial fall-arrest systems and devices;

AS/NZS 4488.1:1997 Industrial rope access systems – Specifications;

AS/NZS 4488.2:1997 Industrial rope access systems – Selection, use and maintenance;



Best practice guidelines for working at heights in New Zealand, Occupational Safety and Health, 2012;

Site Specific Health and Safety Plan.


2 Definition

Industry best practice refers to any enterprise and/or establishment requirements, practices, policy, procedures, methods and protocols which are in accordance with applicable legislation, regulations and New Zealand Standards.
3 Those supervising and/or using the equipment specified in this standard must have attended and completed a Working at Heights Safety Course or show equivalent safety training and knowledge as conducted by the relevant sub-group Occupational Safety and Health of the Department of Labour.
Outcomes and evidence requirements
Outcome 1
Prepare worksite and equipment.
Evidence requirements
1.1 Window cleaning operations preparations comply with job requirements.
Range schedule of work, extent of work, access to building, hours of work.
1.2 Decision to progress with work is made according to weather conditions and is in the interests of the safety of operator and public.
1.3 Worksite is prepared to comply with public safety requirements.
Range warning signs, barriers, power supply turned off, power and telephone lines protected.
1.4 Equipment is checked and certification of building anchors is verified before work commences in accordance with industry best practice.
Range AS/NZS 1891 Set Industrial fall-arrest systems and devices, AS/NZS 4488.1:1997 Industrial rope access systems – Specifications, AS/NZS 4488.2:1997 Industrial rope access systems – Selection, use and maintenance, Health and Safety in Employment Act 1992.
1.5 Ornamental and architectural features are protected from potential damage before cleaning operations commence.
1.6 Cleaning solution is prepared in accordance with manufacturer's recommendations.
1.7 Regulations and standards governing the use of abseiling equipment are met before work commences.
Range AS/NZS 1891 Set Industrial fall-arrest systems and devices, AS/NZS 4488.1:1997 Industrial rope access systems – Specifications, AS/NZS 4488.2:1997 Industrial rope access systems – Selection, use and maintenance, Health and Safety in Employment Act 1992.
Outcome 2
Clean the windows using abseiling technique.
Evidence requirements
2.1 Protective and safety equipment is worn throughout the process.
2.2 Cleaning equipment and materials are attached to harness at all times.
Range hand tools, containers, cleaning equipment.
2.3 Occupational health and safety requirements are observed at all times.
Range Health and Safety in Employment Act 1992.
2.4 Ascenders and descenders are operated in accordance with manufacturer's recommendations.
2.5 Windows are clean, mark and streak free.
2.6 Self rescue is completed in the event of equipment failure without injury to self or public in accordance with industry best practice.
2.7 Operator rescue is completed in the event of accident or injury without further injury to rescuer, operator, and public in accordance with industry best practice.
Outcome 3
Complete job-related tasks.
Evidence requirements
3.1 Equipment and materials are cleaned, checked and stored in accordance with manufacturer’s recommendations.
3.2 Site is cleared in accordance with industry best practice and organisational requirements.
3.3 Tasks are completed without risk or damage to operator, public, site, building or windows.



Planned review date

31 December 2017


Status information and last date for assessment for superseded versions

Process

Version

Date

Last Date for Assessment

Registration

1

26 May 1994

31 December 2011

Review

2

31 August 1996

31 December 2011

Revision

3

3 April 2000

31 December 2011

Revision

4

8 February 2001

31 December 2011

Review

5

26 April 2005

31 December 2011

Review

6

9 December 2010

31 December 2014

Review

7

18 October 2012

N/A




Consent and Moderation Requirements (CMR) reference

0004

This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note

Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.


Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Community Support Services ITO Limited (Careerforce) info@careerforce.org.nz if you wish to suggest changes to the content of this unit standard.

Community Support Services ITO Limited (Careerforce)

SSB Code 101814



Ó New Zealand Qualifications Authority 2016





Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©azrefs.org 2016
rəhbərliyinə müraciət

    Ana səhifə