Nzqa registered unit standard 1326 version 7




Yüklə 32.97 Kb.
tarix11.03.2016
ölçüsü32.97 Kb.

NZQA registered unit standard

1326 version 7




Page of




Title

Develop and make up patterns in the industrial textile fabrication industry

Level

4

Credits

6




Purpose

This unit standard is for people who work in the industrial textile fabrication industry. People credited with this unit standard are able to: identify customer requirements and select pattern material; mark out pattern shape; and make up a pattern, in the industrial textile fabrication industry.




Classification

Industrial Textile Fabrication > Industrial Textile Fabrication Core Skills




Available grade

Achieved




Entry information

Recommended skills and knowledge

Unit 23488, Identify job details, and measure and mark out material for industrial textile fabrication; and Unit 23503, Demonstrate knowledge of developing patterns in the industrial textile fabrication industry; or demonstrate equivalent knowledge and skills.


Explanatory notes
1 Legislation relevant to this unit standard includes but is not limited to the Health and Safety in Employment Act 1992.
2 Definition

Company requirements refer to instructions to staff on policy and procedures which are documented in memo or manual format and are available in the workplace. These requirements include but are not limited to – company specifications and procedures, work instructions, manufacturer specifications, product quality specifications, and legislative requirements.
Outcomes and evidence requirements
Outcome 1
Identify customer requirements and select pattern material in the industrial textile fabrication industry.
Evidence requirements
1.1 Customer requirements are identified in accordance with company requirements.
Range paper, fabric, wood, metal, combination of materials.
1.2 Pattern material is selected to suit job in hand in accordance with company requirements.
Range number to be produced, complexity of shape, recurring order.
Outcome 2
Mark out pattern shape in the industrial textile fabrication industry.
Evidence requirements
2.1 Calculations are made to enable marking out of pattern in accordance with pattern specifications and company requirements.
Range circular geometry, Pythagoras’ theorem, regular and irregular areas, volumes of regular and irregular solids.
2.2 Required shape is developed in accordance with pattern specifications and company requirements.
Range parallel line, radial line, triangulation, perpendiculars, arcs, angles, circles.
2.3 Required shape is marked out on the selected pattern material in accordance with pattern specifications and company requirements.
Range pencil, felt pen, scriber, compass, straight edge, dividers.
2.4 Safe working practices are carried out throughout the task in accordance with legislative requirements.
Range personal safety; safety of other people; workshop safety; tool, equipment, and machine safety.
Outcome 3
Make up a pattern in the industrial textile fabrication industry.
Evidence requirements
3.1 Tools are used that will enable the pattern parts to be cut out in accordance with pattern specifications.
Range knife, scissors, tin snips, saw, file.
3.2 Pattern is fabricated to the required shape and finish in accordance with company requirements.
Range adhesive, rivet, screw, nail, weld.
3.3 Pattern is marked to identify its purpose and layout directions in accordance with company requirements.
3.4 Documentation is completed in accordance with company requirements.
3.5 Safe working practices are carried out throughout the task in accordance with legislative requirements.
Range personal safety; safety of other people; workshop safety; tool, equipment, and machine safety.



Replacement information

This unit standard and unit standard 1325 replaced unit standard 8306.




Planned review date

31 December 2019


Status information and last date for assessment for superseded versions

Process

Version

Date

Last Date for Assessment

Registration

1

3 August 1995

N/A

Revision

2

16 September 1997

N/A

Revision

3

4 November 1997

N/A

Revision

4

28 May 1998

N/A

Review

5

17 August 1999

N/A

Review

6

26 March 2007

N/A

Rollover

7

27 January 2015

N/A




Consent and Moderation Requirements (CMR) reference

0014

This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note

Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.


Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact the

NZ Motor Industry Training Organisation (Incorporated) (MITO) info@mito.org.nz

if you wish to suggest changes to the content of this unit standard.


NZ Motor Industry Training Organisation

(Incorporated)



SSB Code 101542

Ó New Zealand Qualifications Authority 2016





Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©azrefs.org 2016
rəhbərliyinə müraciət

    Ana səhifə