Nzqa expiring unit standard 1566 version 7




Yüklə 28.98 Kb.
tarix16.04.2016
ölçüsü28.98 Kb.

NZQA Expiring unit standard

1566 version 7




Page of




Title

Spot remove stains from hard floors

Level

2

Credits

2




Purpose

This unit standard is for people entering the cleaning industry.
People credited with this standard are able to spot remove stains from hard floors.




Classification

Cleaning and Caretaking > Cleaning Skills




Available grade

Achieved


Explanatory notes
1 Competence demonstrated during assessment against this standard must comply with the requirements of:

Employment Relations Act 2000;

Health and Safety in Employment Act 1992;

Resource Management Act 1991.


2 Equipment and cleaning agents must be used in accordance with manufacturer’s recommendations.
3 Definitions

Flat mop is a type of microfibre mop and can be used in a wet or dry condition.

Mop refers to either a string/cotton, sponge or microfibre type, or a flat mop.

A stain is defined as foreign material (soil, liquid, etc) on a fabric or material that is not removable by standard cleaning methods. This also includes discolouration occurring in or on a fabric or material or any colour other that the natural colour of the fabric or material (ie, red stain, black stain).



Industry best practice refers to any enterprise and/or establishment requirements, practices, policy, procedures, methods and protocols which are in accordance with applicable legislation, regulations and New Zealand Standards.
Outcomes and evidence requirements
Outcome 1
Spot remove stains from hard floors.
Evidence requirements
1.1 Identify type of stain.
Range may include – coffee, tea, chewing gum, tar, oil/grease, paint, mud/soil, ink, biro, crayon, twink, toner, wine, milk, blood.

Evidence of seven is required.


1.2 Equipment and cleaning agents are selected according to type of stain and flooring surface in accordance with industry best practice.
1.3 Selected equipment is clean and in working condition in accordance with industry best practice.
Range stain removal chart, bucket/bowl, mop/colour coded cloths, scraper, cleaning agent, soft scrubbing brush.
1.4 Warning signs are displayed in accordance with industry best practice.
Range at least one of – signs, cordons, barriers.
1.5 Cleaning agent is applied without damage to flooring surface in accordance with industry best practice and manufacturer’s recommendations.
1.6 The stain is treated and removed in accordance with industry best practice.
1.7 Flooring surface is left undamaged and mark-free in accordance with industry best practice.
1.8 Equipment is cleaned, checked and stored in accordance with industry best practice.



Replacement information

This unit standard, unit standard 1563, unit standard 1565, unit standard 1569, unit standard 7182, unit standard 17263, and unit standard 17264 have been replaced by unit standard 28350 and unit standard 28352.


This unit standard is expiring. Assessment against the standard must take place by the last date for assessment set out below.
Status information and last date for assessment for superseded versions

Process

Version

Date

Last Date for Assessment

Registration

1

26 May 1994

31 December 2014

Review

2

31 August 1996

31 December 2014

Review

3

27 April 2000

31 December 2014

Revision

4

8 February 2001

31 December 2014

Review

5

27 February 2006

31 December 2014

Review

6

18 October 2012

31 December 2017

Review

7

17 July 2014

31 December 2017




Consent and Moderation Requirements (CMR) reference

0004

This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note

Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.


Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.

Careerforce

SSB Code 101814



Ó New Zealand Qualifications Authority 2016




New Zealand Qualifications Aut





Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©azrefs.org 2016
rəhbərliyinə müraciət

    Ana səhifə