Nzqa expiring unit standard 1055 version 10

Yüklə 31.86 Kb.
ölçüsü31.86 Kb.

NZQA Expiring unit standard

1055 version 10

Page of


Install a non-electrical sign






This unit standard is for people in the signmaking industry.
People credited with this unit standard are able to: plan the erection of a non-electrical sign; erect a non-electrical sign; and complete on-site work.


Graphic Arts > Signmaking

Available grade


Explanatory notes
1 This unit standard applies to all signage to be erected or fixed to structures except for those requiring an electrical connection. Signs include but are not limited to those made from – timber, glass, plastic, metal, stone, concrete, polystyrene, vinyl.
2 All work practices shall meet the requirements of relevant legislation, including Health and Safety in Employment Act 1992, Resource Management Act 1991, and the requirements of industry codes of practice and documented enterprise procedures in respect to health, safety, and environmental matters.
3 Reference to company policy means any policies, procedures, and requirements of the company involved, and the ethical codes of relevant professional management.
Outcomes and evidence requirements
Outcome 1
Plan the erection of a non-electrical sign.
Evidence requirements
1.1 Job specifications are determined and confirmed prior to erection.
1.2 Planned job sequence meets agreed completion time and is coordinated with other personnel.
1.3 Materials and equipment required for installation are determined and arranged to meet job schedule.
Range examples include but are not limited to – ladders, trestles, scaffolding, cherry pickers, mobile platforms, cranes.
1.4 Permit and clearance requirements are obtained prior to commencement.
1.5 Position of sign is confirmed by inspection of worksite prior to installation.
Outcome 2
Erect a non-electrical sign.
Evidence requirements
2.1 Position of erected sign complies with job specifications.
2.2 On-site assembly is completed to specifications.
2.3 Fixings and fastening of compatible material are installed to manufacturer's requirements and to job specifications.
2.4 Sign is erected to schedule.
Outcome 3
Complete on-site work.
Evidence requirements
3.1 Site clean-up is completed as specified in the contract or to comply with company policy.
3.2 Final documentation is completed accurately and legibly.
3.3 Client approval is obtained.

Replacement information

This unit standard, unit standard 1042, and unit standard 1058 have been replaced by unit standard 27577.

This unit standard is expiring. Assessment against the standard must take place by the last date for assessment set out below.

Status information and last date for assessment for superseded versions




Last Date for Assessment



27 April 1995

31 December 2014



25 March 1996

31 December 2014



31 January 1997

31 December 2014



9 March 1999

31 December 2014



12 December 2000

31 December 2014



16 December 2003

31 December 2014

Rollover and Revision


23 January 2009

31 December 2014



19 January 2012

31 December 2014



16 April 2015

31 December 2019



10 December 2015

31 December 2019

Consent and Moderation Requirements (CMR) reference


This CMR can be accessed at
Please note

Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.

Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.


SSB Code 101571

Ó New Zealand Qualifications Authority 2016

New Zealand Qualifications Aut

Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur © 2016
rəhbərliyinə müraciət

    Ana səhifə