Nzqa expiring unit standard 1046 version 9




Yüklə 32.59 Kb.
tarix29.02.2016
ölçüsü32.59 Kb.

NZQA Expiring unit standard

1046 version 9




Page of




Title

Apply vinyl graphics to smooth and non-smooth surfaces

Level

2

Credits

5




Purpose

This unit standard is for entrants in the signmaking industry.
People credited with this unit standard are able to: cut vinyl letters and graphics; prepare the surfaces; apply vinyl letters and graphics to smooth and non-smooth surfaces; and clean the site.




Classification

Graphic Arts > Signmaking




Available grade

Achieved


Explanatory notes
1 Range

Two smooth surfaces, two non-smooth surfaces.


2 Examples of surfaces include but are not limited to – glass, metal, plastic, cloth, fibreglass, acrylic, vinyl, concrete, paint finish, paper, card, wood, cork.
3 All work practices shall meet the requirements of relevant legislation, including Health and Safety in Employment Act 1992, Resource Management Act 1991, and the requirements of industry codes of practice and documented enterprise procedures in respect to health, safety, and environmental matters.
Outcomes and evidence requirements
Outcome 1
Cut vinyl letters and graphics.
Evidence requirements
1.1 Vinyl film selected meets job specification and is compatible with substrate.
Range include but are not limited to – cast vinyl film, calendered vinyl film.
1.2 Application tape selected meets job specification and is compatible with substrate.
Range include but are not limited to – strong, medium, weak tack, clear tapes.
1.3 Layout of sign meets job specifications.
Range examples include but are not limited to – computer generated, direct layout.
1.4 Cutting and weeding out of vinyl is completed to job specification.
Outcome 2
Prepare the surfaces.
Evidence requirements
2.1 Surfaces are made clean and free from dust and previous lettering, adhesives, and any other material likely to affect adhesion and surface finish.
Outcome 3
Apply vinyl letters and graphics to the surfaces.
Evidence requirements
3.1 Placement of vinyl complies with layout specification.
3.2 Adhesion of vinyl to surface complies with job specification.
Range examples include but are not limited to – short term, long term.
3.3 Surface finishing of vinyl is consistent with job specification and free from all air bubbles and wrinkles.
Outcome 4
Clean the site.
Evidence requirements
4.1 Sign and surrounding surfaces are clean and waste removed to client's/supervisor's satisfaction.
4.2 Tools and equipment are stored according to supervisor's instructions.



Replacement information

This unit standard, unit standard 1043, and unit standard 20193 have been replaced by unit standard 27574.


This unit standard is expiring. Assessment against the standard must take place by the last date for assessment set out below.
Status information and last date for assessment for superseded versions

Process

Version

Date

Last Date for Assessment

Registration

1

27 April 1995

31 December 2014

Review

2

25 March 1996

31 December 2014

Revision

3

9 March 1999

31 December 2014

Revision

4

12 December 2000

31 December 2014

Review

5

16 December 2003

31 December 2014

Rollover and Revision

6

23 January 2009

31 December 2014

Review

7

19 January 2012

31 December 2014

Reinstatement

8

16 April 2015

31 December 2019

Rollover

9

10 December 2015

31 December 2019




Consent and Moderation Requirements (CMR) reference

0005

This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note

Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.


Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.

Competenz

SSB Code 101571



Ó New Zealand Qualifications Authority 2016




New Zealand Qualifications Aut





Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©azrefs.org 2016
rəhbərliyinə müraciət

    Ana səhifə