Item of specifications 940 sm – sm telescopic




Yüklə 13.2 Kb.
tarix14.04.2016
ölçüsü13.2 Kb.


ITEM OF SPECIFICATIONS 940 SM – SM Telescopic





  • Electro mechanical automated system for single and double telescopic sliding doors with a fastening compartment of up to 3000 mm

  • Leaf carrying capacity:

    • For 940 SM sliding operator max 140 Kg for single leaf and 110 Kg for double leaf

    • For 940 SMT telescopic sliding operator max 110+110 Kg. for double leaf and 60+60+60+60 for four leaves

  • Support profile in extruded aluminium

  • Dimensions (height x depth):

- SM = 180x179 mm

- SMT = 205X251 mm

  • Sliding Guide in low noise anti wear plastic

  • Front housing in natural or anodized aluminium, hinge seat on the support profile, laid on anti-vibration rubber pads. Locked at opening by an appendix,

  • Safety cables to avoid the housing from falling (“parachute“)

  • Housing lower profile can be adapted to different thickness of the leaf

  • 24 Vdc gearmotor with optical encoder

  • 24 Vdc gearmotor

  • 940 SDM microprocessor control unit

  • Power supply unit, with low energy consumption toroidal transformer

  • Transmission pulley with screw device to adjust the belt

  • Electro-conductive transmission belt

  • Two wheel carriages on bearing with galvanised steel structure

  • Counter-thrust roller in nylon on bearing

  • Height adjustment± 10 mm

  • Side adjustments ± 15 mm

  • Leaf fitting profile in extruded aluminium

  • Automatic adjustment of open and closed position

  • Measurement of leaf masses and friction

  • Selection of optimal speed , acceleration and deceleration

  • Photocell test

  • Anti-crushing safety device at 150 N

  • SD KEEPER OR SDK LIGHT keyboard with pushbuttons to select the operating programs and LEDs to display diagnostics


Available programs:

    • AUTOMATIC-MANUAL-NIGHT-OPEN-ONE WAY- PARTIAL OPENING

    • By a combination of flashing LEDs you can trace the cause of door alarm

    • Reset functions

    • You can disable operation by means of a jumper and a combination of keys

    • The SD KEEPER keyboard is designed to receive the Programming Display


Programming display main functions

  • You can input access password

  • Adjustment of opening/closing speed from 20 to 180 cm/s

  • Adjustment of pause times from 0 to 30 s

  • Timer function with buffer battery (5 years range)

  • PROGRAMMING DOOR OPERATION FOR 5 DAILY AND WEEKLY TIME BANDS

  • Interlock management with or without impulse memory

  • Anti-intrusion function management

  • Logics selection on battery operation

  • Configuration of 3 outputs on the 940 SDM control unit

  • Configuration of 2 emergency inputs on the 940 SDM control unit

  • Diagnostics display

  • Display of number of cycles performed.




/


Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©azrefs.org 2016
rəhbərliyinə müraciət

    Ana səhifə