Add 3 External or 2 External +1 Internal (Please note: Port1 and Port4 can’t using together) IEEE-1394 root-HUB ports to desktop PC or MAC.
Modular 32-bit host interface compliant to PCI Specification release 2.2.
Compliant with Link Layer Services as defined in 1394 Open Host Controller Interface specification release 1.1.
Descriptor based isochronous and asynchronous DMA channels for receive / transmit packets.
32-bit DMA channels for physical memory read/write.
Supports Serial Bus Data Rates of 100, 200,and 400 Mbits/s.
Supports PCI-Bus Power Management Interface Specification release 1.1.
Fully interoperable with IEEE Std 1394-1995 devices.
Easy plug and play installation.
Support Windows® 98, Windows® ME , Windows®2000 , Windows® XP.
Install Card
Turn off the computer.
Remove the cover of the PC.
Install the IEEE-1394 TO PCI Host Adapter into a vacant PCI slot. Replace the PC’s cover
.Install IEEE-1394 TO PCI Host Adapterdriver Windows® 98
At boot up, Windows® 98 will automatically detect the new hardware on the IEEE-1394 TO PCI Host Adapter. These procedures require both the Windows® 98 Setup CD-ROM, and you will be prompted on when to insert CD-ROM.
Add 3 External or 2 External +1 Internal (Please note: Port1 and Port4 can’t using together) IEEE-1394 root-HUB ports to desktop PC or MAC.
Modular 32-bit host interface compliant to PCI Specification release 2.2.
Compliant with Link Layer Services as defined in 1394 Open Host Controller Interface specification release 1.1.
Descriptor based isochronous and asynchronous DMA channels for receive / transmit packets.
32-bit DMA channels for physical memory read/write.
Supports Serial Bus Data Rates of 100, 200,and 400 Mbits/s.
Supports PCI-Bus Power Management Interface Specification release 1.1.
Fully interoperable with IEEE Std 1394-1995 devices.
Easy plug and play installation.
Support Windows® 98, Windows® ME , Windows®2000 , Windows® XP.
Install Card
Turn off the computer.
Remove the cover of the PC.
Install the IEEE-1394 TO PCI Host Adapter into a vacant PCI slot. Replace the PC’s cover
.Install IEEE-1394 TO PCI Host Adapter driver Windows® 98
At boot up, Windows® 98 will automatically detect the new hardware on the IEEE-1394 TO PCI Host Adapter. These procedures require both the Windows® 98 Setup CD-ROM, and you will be prompted on when to insert CD-ROM.
In response to the message at boot up referring to Add New Hardware Wizard, insert the Windows® 98 Setup CD-ROM into the drive, follow the procedures the system prompt.
Step-1
Step-2
IEEE-1394 Host Adapter Quick Installation Guide
Key Features:
Support PC & MAC.
Add 3 External or 2 External +1 Internal (Please note: Port1 and Port4 can’t using together) IEEE-1394 root-HUB ports to desktop PC or MAC.
Modular 32-bit host interface compliant to PCI Specification release 2.2.
Compliant with Link Layer Services as defined in 1394 Open Host Controller Interface specification release 1.1.
Descriptor based isochronous and asynchronous DMA channels for receive / transmit packets.
32-bit DMA channels for physical memory read/write.
Supports Serial Bus Data Rates of 100, 200,and 400 Mbits/s.
Supports PCI-Bus Power Management Interface Specification release 1.1.
Fully interoperable with IEEE Std 1394-1995 devices.
Easy plug and play installation.
Support Windows® 98, Windows® ME , Windows®2000 , Windows® XP.
Install Card
Turn off the computer.
Remove the cover of the PC.
Install the IEEE-1394 TO PCI Host Adapter into a vacant PCI slot. Replace the PC’s cover
.Install IEEE-1394 TO PCI Host Adapter driver Windows® 98
At boot up, Windows® 98 will automatically detect the new hardware on the IEEE-1394 TO PCI Host Adapter. These procedures require both the Windows® 98 Setup CD-ROM, and you will be prompted on when to insert CD-ROM.
In response to the message at boot up referring to Add New Hardware Wizard, insert the Windows® 98 Setup CD-ROM into the drive, follow the procedures the system prompt.
Step-1
Step-2
Step-3
Step-4
Step-5
Step-6
Verify the IEEE-1394 TO PCI Host Adapter
Click My Computer icon by right-button of mouse.
Choose Properties item.
Select Device Manager selection
Double click the 1394 BUS Controller item.
And check PCI OHCI Compliant IEEE 1394 Host Controllerworks properly.
*All names are registered and unregistered trademarks of their respective cor
Step-7
Step-3
Step-4
Step-5
Step-6
Verify the IEEE-1394 TO PCI Host Adapter
Click My Computer icon by right-button of mouse.
Choose Properties item.
Select Device Manager selection
Double click the 1394 BUS Controller item.
And check PCI OHCI Compliant IEEE 1394 Host Controllerworks properly.
*All names are registered and unregistered trademarks of their respective cor