H. B. Fuller Ges m. b. H product information




Yüklə 13.77 Kb.
tarix09.03.2016
ölçüsü13.77 Kb.




H.B.Fuller Ges.m.b.H

PRODUCT

INFORMATION



INTRAFOLâ 1140/14



Type of product:

Solvent-based primer

areas of application:

INTRAFOLâ L 1140/14 is a suitable primer for PVC furniture edges for subsequent bonding with EVA hot melt adhesives

special properties:

INTRAFOLâ 1140/14 is non-blocking. Performance of INTRAFOL coating effective for at least 2 years.

PRoduct specification:

Viscosity:

approx. 1360 mPas (Brookfield HBT, 20°C)

solid contents:

approx. 14,1 %

Density:

approx. 0.89 g/ml (20°C)

pH-Value:

----

color:

opaque, white when dried. Coloring on request

Hazard. goods classif.:

see Safety Data Sheet /label

storage:

6 months in unopened original packaging

behaviour in cold:

not sensitive to frost


instructions for use:

HARDENER:

Processing without hardener

WORKING TEMPERATURE

application at room temperature

CURING TIME

---

OPEN TIME:

--

APPLICATION PROCEDURE AND TYPE OF APPLICATOR:

roller coater systems

COVERAGE:

20 - 40g wet/m²

DILUTION:

Isa-Verdünner 220

CLEANING AGENT:

Isa-Verdünner 220

working instructions:
PREPARATION:

The bonding surfaces hat to be clean, dry and free of grease and oil.

Stir INTRAFOLâ 1140/14 well before use.

APPLICATION OF PRIMER:

Apply INTRAFOLâ 1140/14 by means of roller coating systems in a thin and homogeneous layer, coverage 20-40g wet/m² i.e. 2.5 - 5 g dry/m². If the primer is applied to heated edge material, drying at room temperature is sufficient.. Drying time at a temperature of 70° C is approx. 45-60 s. In the case of heat drying, the substrate has to be cooled down to room temperature before unrolling.

SPECIAL ATTENTION
Avoid friction of the coating caused by too harsh movement over metal parts or by friction of the transport rolls when guiding the substrate.

In the case of inline-coatings in extrusion equipment, make sure that all water has been completely removed from the coating.




Date of ISSue: 05.02.01 (replaces all prior editions)

Issued by: SBU Assembly, Lab. Dept.


PRINTING DATE: tt.03.jjjj
Please note :

The information, specified in this Product Information, is based on careful laboratory tests and prevailing practical experience.

The information is not binding, which is also generally true for our practical customer service, given verbally, in writing and by tests, since, on account of the versatility of applications and use, also including possible industrial property rights of third parties, we cannot assume any responsibility.

Analysis results and all information regarding state and suitability of our products are only guidelines with no obligation on our part, unless they have been guaranteed expressly in writing, and above all do not represent a guarantee for specific properties.

We advise determining the suitability of our products with respect to their suitability for the intended use and application technology by adequate further testing.

In addition to the above, our General Sales and Delivery Conditions are applicable.

H.B. Fuller Austria Ges.m.b.H.

Kaplanstraße 30

A-4600 Wels

Tel.: +43 / 7242 / 409-0



Fax.: +43 / 7242 / 409-349


/3/9/2016/ARi Page ()


Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©azrefs.org 2016
rəhbərliyinə müraciət

    Ana səhifə