General engineering requirements repair  for boilers and pressure vessels or repair and alteration procedure alteration




Yüklə 21.97 Kb.
tarix10.04.2016
ölçüsü21.97 Kb.
SHEET     of    




GENERAL ENGINEERING REQUIREMENTS REPAIR 

FOR BOILERS AND PRESSURE VESSELS or
REPAIR AND ALTERATION PROCEDURE ALTERATION 

AB-230 2011-09



  1. Name and Address of Organization performing Repair/Alteration      

     
AQP No. & Expiry Date      

Location of Installation      

2. Name of Owner      



Address      

3. Vessel Manufacturer’s Name       CRN      



A#:       National Board #:       Serial No.:       Owner Equip No.:      

4. Original Design Conditions:



i) Vessel/Shellside/Boiler: Max Allowable Working Press.

     

Min/Max Design Temp

     /     

ii) Tubeside: Max Allowable Working Press.

     

Min/Max Design Temp

     /     

iii) Other: Max Allowable Working Press.

     

Min/Max Design Temp

     /     




  1. Original ASME Code Edition and Addenda: ASME Sec.       Year      Addenda      

  2. Repair/Alter. Description of Work. Step by step description of repair/alteration method. Attach additional sheets as needed. If added: Sheet #       thru      .

Reference Drawing #:      

     

     

7a. UT Report enclosed: Yes:  No:  If no, explain:      

7
b. Out of roundness report enclosed (for external pressure only):



Yes:  No:  If no, explain:      

8. Heat Treatment:

Preheat Temp

     

Postweld HT (Temp./Time)

      /       hr

9. Non Destructive Examination (Specify type and extent).


     

10a. Pressure Test Vessel/Boiler/Shellside Tubeside/Other



i) Hydrostatic

     




     

ii) Other Test

     




     

1
0b. Test procedure enclosed: Yes:  No:  If no, explain:      

11

ADDITIONAL REMARKS/COMMENTS:

     

12. Anticipated completion date:      




SIGNATURE OF APPLICANT:       DATE:      





PRINT NAME:      





SHEET     of    



GENERAL ENGINEERING REQUIREMENTS AB-230 2011-09

FOR BOILERS AND PRESSURE VESSELS

REPAIR AND ALTERATION PROCEDURE
Supplemental Sheets:








For ABSA use only: Repair / Alteration Procedure accepted
CRN: A#: Signature: Date:


The information you provide is necessary only for the administration of the programs as required by the Alberta Safety Codes Act and Regulations in the Boiler Discipline.




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©azrefs.org 2016
rəhbərliyinə müraciət

    Ana səhifə