Enter key on your keyboard. Step 2: a login screen will appear, select the User Name




Yüklə 12.09 Kb.
tarix16.04.2016
ölçüsü12.09 Kb.
Technical Support Setup Procedure


How to Configure the DAP-1665 as a Repeater Mode


Step 1:
Open a web browser such as Internet Explorer, Mozilla Firefox or Safari. On the address bar of the web browser type in there the IP Address or the domain name of the device and then press the Enter key on your keyboard.





Step 2:
A login screen will appear, select the User Name as “Admin” and leave the Password field blank and then click on the Log In button.




Step 3:
The DAP-1665 web interface will now show up.



Step 4: Click on SETUP tab then, Click on WIRELESS SETUP on the left side.



Step 5: Under WIRELESS MODE select Repeater on the dropdown box. Under the 2.4GHZ WIRELESS NETWORK Settings configure the following:

Enable Wireless: Put a check mark

Select Create a New Wi-Fi Network Name

Create a new Name for a new wireless network



Under the 2.4GHZ WIRELESS SECURITY SETTINGS

Select the Security Mode

Pre Shared Key: Create your own password



Under the 5GHZ WIRELESS NETWORK Settings configure the following:

Enable Wireless: Put a check mark

Select Create a New Wi-Fi Network Name

Create a new Name for a new wireless network



Under the 5GHZ WIRELESS SECURITY SETTINGS

Select the Security Mode



Pre Shared Key: Create your own password



Step 6: Click on Save Settings button to save the settings.



Step 7: Click on Reboot Now button to reboot the device for the changes to take effect.



Step 8: Wait for the countdown to finish then it will go back to the login page of the device again. Once it is done, device is already setup as a Repeater.





Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©azrefs.org 2016
rəhbərliyinə müraciət

    Ana səhifə