Bellman Visit 868 Bridge, be1520 (GB)




Yüklə 14.63 Kb.
tarix14.04.2016
ölçüsü14.63 Kb.

Bellman Visit 868 Bridge, BE1520 (GB)








Thank you for choosing products from Bellman & Symfon.
The Bellman Visit 868 System consists of a number of radio transmitters and receivers. The transmitters detect different events in the surrounding area and transmit a radio signal to the receivers. The receivers pick up this signal and provide indications using light, sound and/or vibration.
The transmitter determines what type of light, sound or vibration should be displayed so that the reason for the indication is evident.
Read through the entire user manual first and then start to install the system.
Refer to the illustration of the Bellman Visit 868 System on the inside of the cover.





This is how the Bellman Visit 868 Bridge works
The Bellman Visit 868 Bridge conveys signals between the Bellman Visit System and the Bellman Visit 868 System. With a Bellman Visit 868 Bridge, you can therefore use products from the old and new system side by side.

Getting started

Unpacking, installing and testing the unit
1. Open the battery cover (7). Connect the power supply unit to the socket (6), fit one back-up battery, either a 6LR61 alkaline or 6F22 lithium type battery, and close the battery cover.
2. Press the Test Button (2). The Bellman Visit 868 Bridge lights up the LED (1) to indicate that the unit is transmitting a radio signal. The Bellman Visit 868 and Bellman Visit receivers will indicate the Door Signal.
3. Mount the Bellman Visit 868 Bridge on the wall either using the self-adhesive Velcro tape or suspended on the wallmount bracket (8) on the screw supplied. If the Velcro tape is used, the wall on which the transmitter is to be positioned can be cleaned using the enclosed wet wipe. The Bellman Visit 868 Bridge can also be placed on a level surface, e.g. a table, but you should avoid placing it on the floor.


Function


General
The BE1520 Bellman Visit 868 Bridge is a product for indoor use and operates as an interpreter, which conveys radio signals between the Bellman Visit and Bellman Visit 868 systems. With a Bellman Visit 868 Bridge, you can therefore use products from the old and new system side by side.
The Bellman Visit System will not of course have the same wide range of new indication options as the new Bellman Visit 868 System, but the system will emit signals.
The Bellman Visit 868 Bridge also operates as a multi-function transmitter, either via a pushbutton or via an input for an Exterior External Trigger. The Pushbutton and the Exterior External Trigger can be detected separately and transmit different Signal Patterns to the receivers in the Bellman Visit 868 System depending on what has activated the Bellman Visit 868 Bridge. There is a range of options for connecting the Bellman Visit 868 Bridge to various applications.

Radio Key
On delivery all Bellman Visit and Bellman Visit 868 products are tuned to the same Radio Key. If you have a neighbour with a similar system, you can change to different Radio Keys so that you do not affect each other’s systems. If you use the Radio Key Switch (5) to change the Radio Key on this transmitter, you must also change all other units in your Bellman Visit 868 System and your Bellman Visit System to the same Radio Key. Refer to the user manual for the relevant unit.


Indicators and Signals


System indicators
The LED (1) blinks, when the Bellman Visit 868 Bridge transmits or receives radio signals.

Power supply
When the Bellman Visit 868 Bridge is activated, the LED (1) normally blinks green. This means that the back-up battery is in good condition.
If the LED (1) blinks yellow, this means that the back-up battery is flat and must be changed. Only use a 6LR61 (alkaline) or 6F22 (lithium) type battery.
When the Bellman Visit 868 Bridge is connected to the power supply unit, the LED is constantly green, apart from when it is receiving or transmitting radio signals when it blinks.


Troubleshooting in brief


Problem

Solution

Nothing happens when the transmitter is activated with the test button.

• Check that the power supply unit is connected correctly.
• If the power supply unit is not connected, change the back-up battery. Only use an alkaline 6LR61 or a lithium 6F22 type battery.
Make sure that the power supply unit is connected correctly.

The LED (1) blinks yellow when the Bellman Visit 868 Bridge is activated!

• Change the back-up battery. Only use an alkaline 6LR61 or a lithium 6F22 type battery.
Make sure that the power supply unit is connected correctly.

The LED (1) blinks green when the Bellman Visit 868 Bridge is activated but the receivers are not responding.

• Check the batteries in the receivers.
• Check that the receivers are not placed too far away by moving them closer to the Bellman Visit 868 Bridge.
• Check that the Bellman Visit 868 Bridge is set to the correct Radio Key. For further information see Function/Radio Key.

The receiver signals when no transmitter is activated.

• Change the Radio Key on all units in the system. For further information see Function/Radio Key.




For further information about the product in English, refer to the Appendix.




1. LED. Combined transmission and back-up battery indicator. For further information see Indicators and Signals
2. Test button/pushbutton
3. Exterior External Trigger.
4. Signal Switch
5. Radio Key Switch
6. Connector for power supply unit
7. Battery cover
8. Wallmount bracket




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©azrefs.org 2016
rəhbərliyinə müraciət

    Ana səhifə